Hallo!
Hier möchte ich ein-paar Messer von einem russischen Messermacher Alexey Konygin vorstellen. Der Bericht wurde von meinem Freund auf englisch verfasst und mit seiner Erlaubnis stelle ich es hier vor.
*******************
I wish to show you two new works Alexey Konygin.
Alexey used new for him materials in both knives.
And the first experience with a new material was successful.
The first knife it is a small Raven
Blade length 105mm, width 32mm, thickness 3.5mm, Damasteel, AOL 225mm, thickness handle 16mm,
Ti / Timascus, lock Damasteel, weight 178gr
In the Raven it is used original lock-mechanism invented by Alexey.
For unlock it is necessary to press a tail of the Raven.
In video I have shown as it works.
http://www.youtube.com/watch?v=1WY0Dbso_Lk
Alexey for the first time worked with Damasteel and Timascus.
With Damasteel there were no problems. Alexey very beautifully has ground and finished it.
Timascus Alexey finished and anodized 4 or 5 times.
Big difficulties were because parts handle the Raven have very complex figure.
They are very difficult for anodizing equally.
But all efforts have paid back because the Raven is very beautiful.
The raven cannot be used as EDC but it is very beautiful.
Alexey's design plus damasteel and timascus = BAD ASS!!!!
The second work it is redesign Decepticon
Blade length 105mm, thickness 4mm, steel PSF-127, thickness handle 14mm, AOL 235mm,
Ti/Zirconium, weight 172gr.
Alexey for the first time worked with Zirconium. He was very cautious and on it his the workshop has not burned down.
It is the first Decepticon which it is possible to use as EDC.
I have made it - have put Decepticon on a pocket of jeans.
Very comfortable feeling of a knife in a hand. I am very happy.
http://www.youtube.com/watch?v=bO5PkPUNLYI
I like new Decepticon
******************
ich hoffe euch gefällt es auch!
Danke und Gruß,
Alexander
Hier möchte ich ein-paar Messer von einem russischen Messermacher Alexey Konygin vorstellen. Der Bericht wurde von meinem Freund auf englisch verfasst und mit seiner Erlaubnis stelle ich es hier vor.
*******************
I wish to show you two new works Alexey Konygin.
Alexey used new for him materials in both knives.
And the first experience with a new material was successful.
The first knife it is a small Raven
Blade length 105mm, width 32mm, thickness 3.5mm, Damasteel, AOL 225mm, thickness handle 16mm,
Ti / Timascus, lock Damasteel, weight 178gr
In the Raven it is used original lock-mechanism invented by Alexey.
For unlock it is necessary to press a tail of the Raven.
In video I have shown as it works.
http://www.youtube.com/watch?v=1WY0Dbso_Lk
Alexey for the first time worked with Damasteel and Timascus.
With Damasteel there were no problems. Alexey very beautifully has ground and finished it.
Timascus Alexey finished and anodized 4 or 5 times.
Big difficulties were because parts handle the Raven have very complex figure.
They are very difficult for anodizing equally.
But all efforts have paid back because the Raven is very beautiful.
The raven cannot be used as EDC but it is very beautiful.
Alexey's design plus damasteel and timascus = BAD ASS!!!!
The second work it is redesign Decepticon
Blade length 105mm, thickness 4mm, steel PSF-127, thickness handle 14mm, AOL 235mm,
Ti/Zirconium, weight 172gr.
Alexey for the first time worked with Zirconium. He was very cautious and on it his the workshop has not burned down.
It is the first Decepticon which it is possible to use as EDC.
I have made it - have put Decepticon on a pocket of jeans.
Very comfortable feeling of a knife in a hand. I am very happy.
http://www.youtube.com/watch?v=bO5PkPUNLYI
I like new Decepticon
******************
ich hoffe euch gefällt es auch!
Danke und Gruß,
Alexander
