Hinderer XM-18 on the Wicked Edge sharpener

kwakster

Mitglied
Messages
569
This is the Hinderer XM-18 from a fellow forum member.
The request was to find a good balance between usefulness & esthetics; if possible to create a new edge that would cut well (with an edge angle fitting a strong tactical folder like the XM) while at the same time keeping the bevel width within limits.

The edge was first reprofiled to an even 35 degrees inclusive with diamond stones 200, 400 & 600, and then refined with SiC wet & dry paper 800, 1000, 1500 and 2000 taped to the diamond stones.
The resulting edge was then somewhat polished with 6 micron diamond paste (a tiny dab of paste on the back of wet & dry paper which was then taped to the 600 grit stones)


GEDC1975.jpg

GEDC1976.jpg

GEDC1987.jpg

GEDC1977.jpg

GEDC1981.jpg

GEDC1980.jpg

GEDC1988.jpg

GEDC1978.jpg
 
the mirror polish is really awesome!
How long did it take to get this finish after the 2000 grit?
 
the mirror polish is really awesome!
How long did it take to get this finish after the 2000 grit?

After about 15 minutes work i got the finish you see in the pics.
It is however not a true mirror finish, as with a jewelers loupe you can still see minute scratches.
 
Back